9 Port Manifold Kit
Included in the 9 Port Manifold Kit is:-
- ½”M x ¼”F Bush (2 off)
- 1”F x 1 ¼”M Ball Valve (Red)
- 1”F x 1 ¼”M Ball Valve (Blue)
- 1”M End Cap with ½”F & Brass Drain Valve (2 off)
- ½” Automatic Air Valve
- Pressure Gauge with Radial Coupling
- Eurokono x 16/2mm Coupling (18 off)
- 1” x ¼”F Soft Seal Fitting (2 off)
- Pre-Mounted Support Brackets
- Protection Caps
- Flow Gauges
All 9 port distribution manifolds are made from drawn brass bars with a special profile. This 9 Port manifold is tested under pressure with fixtures and fittings mounted to ensure that there are no leaks and a stress relieving treatment is submitted to eliminate all possibility of future cracking and breaking.
Underfloor heating pipes are connected by means of two types of fittings: with an M24x1.5 thread or 3/4 Eurokono; both are mounted on the manifold with an o-ring and sealed to ensure they do not loosen when disassembling the fitting. All the 9 port manifold fittings and accessories (discharge valves, air valves, etc…) are soft-sealed with o-rings
Threads on the main column connections are according to the ISO228 standard
