11 Port Manifold

All distribution manifolds are made from drawn brass bars with a special profile. They are machined and assembled automatically using the special innovative machinery in the workshops of Ivar.

Each manifold is tested under pressure with all the fittings and accessories mounted to be sure that there are no leaks.
The manifolds and fittings obtained directly from the bars are submitted to stress relieving treatment after mechanical finishing to eliminate all possibility of future cracking and breaking.

Threads on the main column connections are according to the ISO228 standard. Derivation pipes are connected by means of two types of fittings: with a M24x1.5 thread or 3/4 EUROKONUS; both are mounted on the manifold with an o-ring and sealed to ensure they do not loosen when disassembling the fitting. All the manifold fittings and accessories (discharge valves, air valves, etc…) are soft-sealed with o-rings and do not require any other intermediate seals (such as p.t.f.e., hemp, etc…).